Cloud-electronics CDR-1B Instrukcja Użytkownika

CDR-1 & CDR-1FRemote Control UnitsInstallation Guide

CDR‑1 & CDR‑1F Installation Guide v2.010Connecting and mounting – CDR-1The CDR-1 is designed for use with single-gang UK, US or Australian electri

CDR‑1 & CDR‑1F Installation Guide v2.0 114. Plug the cables into the CDR-1 sockets. The CAT-5 cable going to the mixer (possibly via other CDRs)

CDR‑1 & CDR‑1F Installation Guide v2.0126. Angle the CDR-1 so that the top is closer to the wall and push onto the mounting plate such that the t

CDR‑1 & CDR‑1F Installation Guide v2.0 13Connecting and mounting – CDR-1FThe CDR-1F is intended for use with dual-gang UK size steel or PVC dry-li

CDR‑1 & CDR‑1F Installation Guide v2.0143. Check that jumper J1 is in the OFF position. J2 should be set according to the CDR1F’s position in the

CDR‑1 & CDR‑1F Installation Guide v2.0 15Each CDR must be assigned to a zone; this will normally be the zone in which it is physically located. As

CDR‑1 & CDR‑1F Installation Guide v2.016Installer mode allows access to the following unit-specic settings:• Backlight and contrast adjustment•

CDR‑1 & CDR‑1F Installation Guide v2.0 17Default settingsJ1= OFFJ2 = ENDKEY = “<<>>”Should you have any questions concerning the insta

CDR‑1 & CDR‑1F Installation Guide v2.018Notes

CDR‑1 & CDR‑1F Installation Guide v2.0 19

Cloud Electronics Limited140 Staniforth Road, Shefeld. S9 3HF. EnglandTel: +44 (0)114 244 7051 Fax: +44 (0)114 242 5462E-mail: [email protected] Web:

CDR‑1 & CDR‑1F Installation Guide v2.0 3ContentsContentsIntroduction ...4Model typ

CDR‑1 & CDR‑1F Installation Guide v2.04The CDR-1 & CDR-1F are remote control units specically designed for use with the DCM-1/e. They may be

CDR‑1 & CDR‑1F Installation Guide v2.0 5What’s in the boxAs well as this manual, the shipping carton should contain the items listed below. Pleas

CDR‑1 & CDR‑1F Installation Guide v2.06CDR-1 PORTSPORTAPORTAPORTBPORTBAll DCM-1terminations are OFFTermination ON Te rminationONDCM-1/eININININTer

CDR‑1 & CDR‑1F Installation Guide v2.0 7Diag. (a) shows four CDRs, each connected to one DCM-1/e port; (b) shows a single daisy-chain of two CDRs

CDR‑1 & CDR‑1F Installation Guide v2.08Cable length and DC power considerationsThe DCM-1/e’s internal PSU has sufcient capacity to power 8 CDR

CDR‑1 & CDR‑1F Installation Guide v2.0 9WiringFeed the installed CAT-5 cable(s) (or pre-made patch cable(s)) into the back box on which the CDR is